Products

Home

Products

RUBBER INKS

Premium Rubber White/Clear Super Matt

Extremely soft and elastic textile ink

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
White 97%
Fixer 3%

COLOUR PRINT
White 15-20%
Clear 70-75%
Colour Pigment 5-7%
Fixer 3%

Premium Rubber White/Clear XM

Extremely soft and elastic extra matt textile ink

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
White 97%
Fixer 3%

COLOUR PRINT
White 15-20%
Clear 70-75%
Colour Pigment 5-7%
Fixer 3%

Silkflex PUMA PU White/Clear

Extremely soft and elastic textile ink, quick dry and excellent in rub fastness

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
White 100%

COLOUR PRINT
White 15-20%
Clear 73-78%
Colour Pigment 5-7%

Silkflex Neoprint White/Clear

Extremely soft and elastic textile ink, matt finish, excellent in rub fastness

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using a hairdryer or other methods.
2. Allow for 2-4 hours of ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
White 97%
Fixer 3%

COLOUR PRINT
White 15-20%
Clear 70-75%
Colour Pigment 5-7%
Fixer 3%

DISCHARGE EFFECT INKS

Aquadis White/Clear

Eco-friendly, formaldehyde-free, single-pack textile inks for discharge effect

Printing Parameters
Squeegee : 70 SHORE
Mesh : 190/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using a hairdryer or other methods.
2. Allow for 2-4 hours of ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
White 100%

COLOUR PRINT
Clear 97%
Colour Pigment 3%

Aquadis CMYK

Ready-made eco-friendly formaldehyde-free single pack textile inks for processed colour discharge effect

Printing Parameters
Squeegee : 70 SHORE
Mesh : 190/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
White 97%
Fixer 3%

COLOUR PRINT
White 15-20%
Clear 70-75%
Colour Pigment 5-7%
Fixer 3%

MACHINE INKS

Elastisol White/Clear EWS/ECS

Extremely soft and elastic water-based inks for high resolution textile print

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
White 97%
Fixer 3%

COLOUR PRINT
White 15-20%
Clear 70-75%
Colour Pigment 5-7%
Fixer 3%

Elastisol White/Clear S.Matt

Extremely soft and elastic water-based inks for high resolution textile print

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
White 97%
Fixer 3%

COLOUR PRINT
White 15-20%
Clear 70-75%
Colour Pigment 5-7%
Fixer 3%

Elastisol High Density

Extremely soft and elastic water-based inks for high-density print

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : depend to the required thickness

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
BASE PRINT
High Density Clear 97%
Fixer 3%
TOP PRINT
High Density WHITE 97%
Fixer 3%
COLOUR PRINT
High Density White 15-20%
High Density Clear 70-75%
Colour Pigment 5-7%
Fixer 3%

Elastisol White/Clear M/C

Extremely soft and elastic water-based inks for high-resolution textile print

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using a hairdryer or other methods.
2. Allow for 2-4 hours of ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
White 97%
Fixer 3%

COLOUR PRINT
White 15-20%
Clear 70-75%
Colour Pigment 5-7%
Fixer 3%

INKS FOR NYLON/JEANS FABRIC

Aqua Nylon White/Clear

Stone/enzyme wash resistant inks for nylon and jeans fabric

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
White 97%
Fixer 3%

COLOUR PRINT
White 15-20%
Clear 70-75%
Colour Pigment 5-7%
Fixer 3%

PRODUCTS FOR ALL-OVER PRINT

Silkbond 35

Eco-friendly high-quality printing paste

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using a hairdryer or other methods.
2. Allow for 2-4 hours of ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Printing Paste Formulation
Silkbond 35 15-18%
Thickener 1%
Water 82-84%

Printing Ink Formulation
WHITE PRINT
Printing Paste 90-95%
Pigment Una White 5-10%
COLOUR PRINT
Printing Paste 90-95%
Colour Pigment 5-10%

Elastic AOP White/Clear

Extremely soft and elastic white ink for all-over print

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using a hairdryer or other methods.
2. Allow for 2-4 hours of ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
AOP White 100%

COLOUR PRINT
White 15-20%
Clear 73-78%
Colour Pigment 5-7%

Elastic AOP White/Clear Plus

Extremely soft and elastic white ink for all-over print

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using a hairdryer or other methods.
2. Allow for 2-4 hours of ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
AOP White 100%

COLOUR PRINT
White 15-20%
Clear 73-78%
Colour Pigment 5-7%

INKS FOR SPECIAL EFFECTS

Fabric Sealer

Eco-friendly Anti-Migration Sealer

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using a hairdryer or other methods.
2. Allow for 2-4 hours of ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
UNDERCOAT
Fabric Sealer 97%
Fixer 3%

Glitter Paste

Highly transparent and soft gel for glitter print

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using a hairdryer or other methods.
2. Allow for 2-4 hours of ambient drying.
3. Heat cure at 130 - 150°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
UNDERCOAT
WHITE PRINT
Rubber White 97%
Fixer 3%

TOP PRINT
GLITTER PRINT
Clear 95%
Glitter Powder 5%

Silicon White/Clear Glossy

Water-based silicone-like inks

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
White 97%
Fixer 3%

COLOUR PRINT
White 15-20%
Clear 70-75%
Colour Pigment 5-7%
Fixer 3%

High Density White/Clear

Eco-friendly and soft feel inks for high density print

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : depend to the required thickness

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
BASE PRINT
High Density Clear 97%
Fixer 3%

TOP PRINT
High Density WHITE 97%
Fixer 3%
COLOUR PRINT
High Density White 15-20%
High Density Clear 70-75%
Colour Pigment 5-7%
Fixer 3%

Emboss

Highly concentrated and non tacky puff ink

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Prepare the printing ink and print directly on the fabric .
2. Allow for 2-4 hours of ambient drying.
3. Heat press at 160°C for 10-15 seconds, pressure:8T.
4. Allow for overnight after heat press before any physical testing of prints.

Formulation
WHITE PRINT
White 49%
Emboss 49%
Fixer 2%

COLOUR PRINT
Clear 65-70%
Emboss 30-35%
Colour Pigment 5-7%
Fixer 2%

Foil Glue

Highly durable and soft glue for foil transfer

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using a hairdryer or other methods.
2. Allow for 30 minutes of ambient drying.
3. Apply the foil paper on top of the foil paper.
4. Allow for overnight before any physical testing of prints.

Flock Glue

Highly durable and soft glue for sprinkle/transfer flock print

Printing Parameters
Squeegee : 65 SHORE
Mesh : 150/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
UNDERCOAT
Flock Glue 98%
Crosslinker 2%

Transfer Glue

Printable heat sensitive glue for transfer print

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using a hairdryer or other methods.
2. Allow for 30 minutes of ambient drying.
3. Apply the foil paper on top of the foil paper.
4. Allow for overnight before any physical testing of prints.

Aquacrack White/Clear

Highly durable and soft auto-crack inks

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print (cool air) in between rounds using a hairdryer or other methods.
2. Allow for 2-4 hours of ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
UNDERCOAT
Premium Rubber Clear 100%

WHITE PRINT
Aquacrack White 97%
Fixer 3%

COLOUR PRINT
Aquacrack White 15-20%
Aquacrack Clear 70-75%
Colour Pigment 5-7%
Fixer 3%

Gloss Gel

Highly transparent ink to improve gloss

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
WHITE PRINT
Rubber White 97%
Fixer 3%

COLOUR PRINT
Rubber White 15-20%
Rubber Clear 70-75%
Colour Pigment 5-7%
Fixer 3%

TOP PRINT
Gloss Gel 100%

Aquafoil

Water-based foil ink with high brilliance

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
UNDERCOAT
Rubber White 97%
Fixer 3%

GOLD PRINT
Aquafoil Gold 100%

SILVER PRINT
Aquafoil Silver 100%

COLOR PRINT
Aquafoil Clear 95-97%
Colour pigment 3-5%

Matt Kote

Premium surface matting ink, excellent matting ability

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 1

Printing Application
1. Blow dry print in between rounds using a hairdryer or other methods.
2. Allow for 2-4 hours of ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
TOP PRINT
Matt Kote 100%

Glow-In-The-Dark

Soft feel Phosphorescent textile ink

Printing Parameters
Squeegee : 65 SHORE
Mesh : 120/inch
Tension : 25 N/cm²
Clean Up : Water
Strokes : 3
Rounds : 2

Printing Application
1. Blow dry print in between rounds using hairdryer or other methods.
2. Allow for 2-4 hours ambient drying.
3. Heat cure at 130 - 160°C for 2 minutes.
4. Allow for overnight after heat cure before any physical testing of prints.

Formulation
UNDERCOAT
Rubber White 97%
Fixer 3%

PHOSPHORESCENT PRINT
Glow In The Dark Paste 100%

ADDITIVES

Nylon Oxal

Eco-friendly formaldehyde-free adhesion promoter Formulation
Use 3-5%

Crosslinker

Eco-friendly crosslinker to improve toughness and durability Formulation
Use 3-5%

Eco Oxal Fixer

Eco-friendly formaldehyde-free adhesion promoter Formulation
Use 5-7%