Menu
Home » Products
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege:70-75 SHORE
Mesh: 190/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege:70-75 SHORE
Mesh: 120 – 190/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege:70-75 SHORE
Mesh: 120 – 190/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege:70-75 SHORE
Mesh: 120 – 190/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege:70-75 SHORE
Mesh: 120 – 190/inch
Tension: 25 – 35 N/cm²
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege:60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Silkflex AquaNylon must added with 3-5% of Silkflex Nylon Oxal for prints on Nylon fabric
Silkflex AquaNylon must added with 3-5% of Silkflex Nylon Oxal and 1-3% of Silkflex Crosslinker for prints on denim for stone and enzyme wash
Printing Parameters
Squeege:60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege:60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Apply as top coat and dry print using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using cool air or other methods.
2. Blow dry last round using hot air or other methods.
3. Allow for 2 – 4 hours ambient drying.
4. Heat cure at 130 – 160oC for 2 minutes.
5. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 110 – 135oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Silkflex White TF or Clear TF must added 10% of Silkflex Part B for prints on Taffeta fabric
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Printing Parameters
Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 – 4 hours ambient drying.
3. Heat cure at 130 – 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%
Application
Additive to improve soft handfeel
Formulation
3-5% of Silkflex Nylon Oxal added to Silkflex AquaNylon for Nylon fabric
3-5% of Silkflex Nylon Oxal added to Silkflex AquaNylon for Denim prints for stone and enzyme wash
Application
Formulation
1-3% of Silkflex Crosslinker added to Silkflex AquaNylon for prints on denim for stone and enzyme wash
0.5% of Silkflex Crosslinker added to Silkflex Inks as intercoat for Heat Transfer system
Application
Formulation
Application
Formulation
10% of Silkflex Part B added to Silkflex TF White/Clear for prints on Taffeta fabric
Application
Soft binder for printing paste which provides great wash and rub fastness, enhancing color intensity.
Formulation
Dosage of 12-15% of Silkflex Silkbond 35 for printing paste preparation